This image was saved by Clonezilla at 2021-02-17 17:53:16 UTC.
Saved by clonezilla-live-2.5.5-38-amd64.
The log during saving:
----------------------------------------------------------
Starting /usr/sbin/ocs-sr at 2021-02-17 17:50:40 UTC...
*****************************************************.
Clonezilla image dir: /home/partimag
Shutting down the Logical Volume Manager
Finished Shutting down the Logical Volume Manager
The selected devices: sda
PS. Next time you can run this command directly:
/usr/sbin/ocs-sr -q2 -c -j2 -z1p -i 4096 -sfsck -scs -senc -p poweroff savedisk 2021-02-17-17-itg-v13-final sda
*****************************************************.
The selected devices: sda
Searching for data/swap/extended partition(s)...
The data partition to be saved: sda1 sda2 sda3 sda4
The selected devices: sda1 sda2 sda3 sda4
The following step is to save the hard disk/partition(s) on this machine as an image:
*****************************************************.
Machine: OptiPlex 980 
sda (120GB_KINGSTON_SA400S3_KINGSTON_SA400S37120G_50026B77823AFF3C)
sda1 (200M_vfat_NO_NAME(In_KINGSTON_SA400S3)_KINGSTON_SA400S37120G_50026B77823AFF3C)
sda2 (10G_ext4(In_KINGSTON_SA400S3)_KINGSTON_SA400S37120G_50026B77823AFF3C)
sda3 (1G_ext4(In_KINGSTON_SA400S3)_KINGSTON_SA400S37120G_50026B77823AFF3C)
sda4 (500M_ext4(In_KINGSTON_SA400S3)_KINGSTON_SA400S37120G_50026B77823AFF3C)
*****************************************************.
-> "/home/partimag/2021-02-17-17-itg-v13-final".
Shutting down the Logical Volume Manager
Finished Shutting down the Logical Volume Manager
Saving block devices info in /home/partimag/2021-02-17-17-itg-v13-final/blkdev.list...
Saving block devices attributes in /home/partimag/2021-02-17-17-itg-v13-final/blkid.list...
Checking the integrity of partition table in the disk /dev/sda... 
Reading the partition table for /dev/sda...RETVAL=0
*****************************************************.
The first partition of disk /dev/sda starts at 2048.
Saving the hidden data between MBR (1st sector, i.e. 512 bytes) and 1st partition, which might be useful for some recovery tool, by:
dd if=/dev/sda of=/home/partimag/2021-02-17-17-itg-v13-final/sda-hidden-data-after-mbr skip=1 bs=512 count=2047
2047+0 records in
2047+0 records out
1048064 bytes (1.0 MB, 1.0 MiB) copied, 0.0447328 s, 23.4 MB/s
*****************************************************.
Saving the MBR data for sda...
1+0 records in
1+0 records out
512 bytes copied, 0.00204329 s, 251 kB/s
Starting saving /dev/sda1 as /home/partimag/2021-02-17-17-itg-v13-final/sda1.XXX...
/dev/sda1 filesystem: vfat.
*****************************************************.
*****************************************************.
Use partclone with pigz to save the image.
Image file will be split with size limit 4096 MB.
*****************************************************.
If this action fails or hangs, check:
* Is the disk full ?
*****************************************************.
Run partclone: partclone.vfat -z 10485760 -N -L /var/log/partclone.log -c -s /dev/sda1 --output - | pigz -c --fast -b 1024 --rsyncable | split -a 2 -b 4096MB - /home/partimag/2021-02-17-17-itg-v13-final/sda1.vfat-ptcl-img.gz. 2> /tmp/split_error.4ALnRg
Partclone v0.3.11 http://partclone.org
Starting to clone device (/dev/sda1) to image (-)
Reading Super Block
memory needed: 21022724 bytes
bitmap 51200 bytes, blocks 2*10485760 bytes, checksum 4 bytes
Calculating bitmap... Please wait... 
done!
File system:  FAT16
Device size:  209.7 MB = 409600 Blocks
Space in use:  69.2 MB = 135192 Blocks
Free Space:   140.5 MB = 274408 Blocks
Block size:   512 Byte
Total block 409600
Syncing... OK!
Partclone successfully cloned the device (/dev/sda1) to the image (-)
>>> Time elapsed: 7.30 secs (~ .121 mins)
*****************************************************.
Finished saving /dev/sda1 as /home/partimag/2021-02-17-17-itg-v13-final/sda1.vfat-ptcl-img.gz
*****************************************************.
Starting saving /dev/sda2 as /home/partimag/2021-02-17-17-itg-v13-final/sda2.XXX...
/dev/sda2 filesystem: ext4.
*****************************************************.
*****************************************************.
Use partclone with pigz to save the image.
Image file will be split with size limit 4096 MB.
*****************************************************.
If this action fails or hangs, check:
* Is the disk full ?
*****************************************************.
Run partclone: partclone.ext4 -z 10485760 -N -L /var/log/partclone.log -c -s /dev/sda2 --output - | pigz -c --fast -b 1024 --rsyncable | split -a 2 -b 4096MB - /home/partimag/2021-02-17-17-itg-v13-final/sda2.ext4-ptcl-img.gz. 2> /tmp/split_error.UZ5BHE
Partclone v0.3.11 http://partclone.org
Starting to clone device (/dev/sda2) to image (-)
Reading Super Block
memory needed: 21299204 bytes
bitmap 327680 bytes, blocks 2*10485760 bytes, checksum 4 bytes
Calculating bitmap... Please wait... 
done!
File system:  EXTFS
Device size:   10.7 GB = 2621440 Blocks
Space in use:   5.6 GB = 1379279 Blocks
Free Space:     5.1 GB = 1242161 Blocks
Block size:   4096 Byte
Total block 2621440
Syncing... OK!
Partclone successfully cloned the device (/dev/sda2) to the image (-)
>>> Time elapsed: 78.41 secs (~ 1.306 mins)
*****************************************************.
Finished saving /dev/sda2 as /home/partimag/2021-02-17-17-itg-v13-final/sda2.ext4-ptcl-img.gz
*****************************************************.
Starting saving /dev/sda3 as /home/partimag/2021-02-17-17-itg-v13-final/sda3.XXX...
/dev/sda3 filesystem: ext4.
*****************************************************.
*****************************************************.
Use partclone with pigz to save the image.
Image file will be split with size limit 4096 MB.
*****************************************************.
If this action fails or hangs, check:
* Is the disk full ?
*****************************************************.
Run partclone: partclone.ext4 -z 10485760 -N -L /var/log/partclone.log -c -s /dev/sda3 --output - | pigz -c --fast -b 1024 --rsyncable | split -a 2 -b 4096MB - /home/partimag/2021-02-17-17-itg-v13-final/sda3.ext4-ptcl-img.gz. 2> /tmp/split_error.azMgqj
Partclone v0.3.11 http://partclone.org
Starting to clone device (/dev/sda3) to image (-)
Reading Super Block
memory needed: 21004292 bytes
bitmap 32768 bytes, blocks 2*10485760 bytes, checksum 4 bytes
Calculating bitmap... Please wait... 
done!
File system:  EXTFS
Device size:    1.1 GB = 262144 Blocks
Space in use:  53.1 MB = 12956 Blocks
Free Space:     1.0 GB = 249188 Blocks
Block size:   4096 Byte
Total block 262144
Syncing... OK!
Partclone successfully cloned the device (/dev/sda3) to the image (-)
>>> Time elapsed: 7.18 secs (~ .119 mins)
*****************************************************.
Finished saving /dev/sda3 as /home/partimag/2021-02-17-17-itg-v13-final/sda3.ext4-ptcl-img.gz
*****************************************************.
Starting saving /dev/sda4 as /home/partimag/2021-02-17-17-itg-v13-final/sda4.XXX...
/dev/sda4 filesystem: ext4.
*****************************************************.
*****************************************************.
Use partclone with pigz to save the image.
Image file will be split with size limit 4096 MB.
*****************************************************.
If this action fails or hangs, check:
* Is the disk full ?
*****************************************************.
Run partclone: partclone.ext4 -z 10485760 -N -L /var/log/partclone.log -c -s /dev/sda4 --output - | pigz -c --fast -b 1024 --rsyncable | split -a 2 -b 4096MB - /home/partimag/2021-02-17-17-itg-v13-final/sda4.ext4-ptcl-img.gz. 2> /tmp/split_error.alP8as
Partclone v0.3.11 http://partclone.org
Starting to clone device (/dev/sda4) to image (-)
Reading Super Block
memory needed: 20987524 bytes
bitmap 16000 bytes, blocks 2*10485760 bytes, checksum 4 bytes
Calculating bitmap... Please wait... 
done!
File system:  EXTFS
Device size:  524.3 MB = 128000 Blocks
Space in use: 100.2 MB = 24461 Blocks
Free Space:   424.1 MB = 103539 Blocks
Block size:   4096 Byte
Total block 128000
Syncing... OK!
Partclone successfully cloned the device (/dev/sda4) to the image (-)
>>> Time elapsed: 7.19 secs (~ .119 mins)
*****************************************************.
Finished saving /dev/sda4 as /home/partimag/2021-02-17-17-itg-v13-final/sda4.ext4-ptcl-img.gz
*****************************************************.
End of saveparts job for image /home/partimag/2021-02-17-17-itg-v13-final.
*****************************************************.
*****************************************************.
End of savedisk job for image 2021-02-17-17-itg-v13-final.
Checking if udevd rules have to be restored...
This program is not started by Clonezilla server, so skip notifying it the job is done.
Finished!
This program is not started by Clonezilla server, so skip notifying it the job is done.
Finished!
### End of log ###
### Image created time: 2021-0217-1753
